Eject Disk Manually
Eject the Disc Using Other Methods. This method is to tilt the MacBook to an angle of about 45 degrees so the disc would effectively drop out if it wasn’t stuck, and then press the eject key. Tilt Macbook sideways if the drive is on the side of your Macbook, forwards towards you if the drive is at the front. For ejecting the DVD tray using Windows 10, you can make use of any of the three methods listed below: Method # 1: Use the Eject Button. It is the easiest and simplest method of ejecting the DVD tray. For doing this, you just need to locate the eject button which is most likely to be present on your DVD tray or towards either of its sides. Ejecting the stuck disc can usually be done in one of the following ways: 1. Restart the computer and after the chime press and hold down the left mouse button until. Press the Eject button on your keyboard. Click on the Eject button in the menubar. Press COMMAND-E. If none of the. Manually eject the disc tray. Unplug the power and A/V cables from the back of your console. If your console has a hole below the right side of the disc drive, insert the straight end of the paper clip into the hole as shown in the picture below.
While there is a button on CD/DVD tray to let you eject DVD or CD, many people prefer using keyboard or a simple click to eject the DVD. This may be because sometimes it is an inconvenience as the DVD door may not be on front and using the button might involve searching for the button. And then at times the physical button just may not work properly. Moreover, being able to control DVD tray using keyboard or mouse is faster.
Eject or close CD/DVD Tray
Eject Mac Disk Manually
Some people a create custom VBScripts for a sequence of tasks. Calling a third party enables such people to eject DVD/CD tray without performing any manual task. Whatever be your reason, check out the following ways to eject DVD or close it using keyboard or mouse.
Using Door Control to open DVD Tray
Door Control is lightweight freeware that allows you to eject the DVD door/tray using a simple mouse click. When you install Door Control, you get an icon in the Windows System Tray. Whenever you wish to eject the DVD tray, simply click on the icon.
You can also configure hotkeys using Door Control if you prefer the keyboard over mouse. You can have both mouse and hotkeys. If you are using a mouse you can click the System Tray icon.When on keyboard gaming or doing anything else, you can simply press the hotkey.
To set up the hotkeys, right click on the Door Control icon. It will open a small window containing three keys: F11, Home, and F8 keys. You just need to select one of them and click OK, as shown in the image above. Once set, you can use it any time you wish. Just make sure you have selected the option to start Door Control with Windows. The software works well all versions of Windows, including Windows 10. You can download Door Control from the Digola website.
WinEject to eject or close DVD tray using Hotkeys and Mouse
Though WinEject claims to close DVD drive tray, I could not get it to work for closing the tray. It does eject DVD using keyboard and mouse click. The third party software works the same way as the above one. It ejects the DVD tray when you click its icon in the Windows System Tray. The application site says it also closes the door – both manually and automatically, but I could not get this function working on my computer.
You can also set up Hotkeys to use for opening the DVD door. Unlike Door Control that gives you option of selected keys only, you can select any hotkey of your choice in WinEject.
Open the Settings by right clicking on the System Tray icon of WinEject and then go to Hotkeys tab. There, place the cursor in the hotkey selection textbox, and press the key combination you wish to use for ejecting the DVD. Then click OK and close the Settings dialog. After setting up the Hotkey, you can use it to open the door. You can also set up auto close CD door under Settings -> General. You just have to specify the number of seconds to wait before the door auto closes. Download WinEject here.
Close CD/DVD tray using command line
You can use the NirCmd.exe program from Nirsoft for a number of tasks, including opening and closing the DVD tray/door. You will have to run a command line command each time you wish to open or close the CD door.
NirCmd can add Open & Close CD/DVD Tray to Context Menu
A better method is to download NirSoft NirCmd.exe and copy it to the Windows folder. Then create a shortcut that you can double click to run the commands. You can create a shortcut to eject DVD tray and a shortcut to close DVD door. To create a shortcut:
- Right click on the desktop
- Select New -> Shortcut
- In the text box that appears, type: C:Windowsnircmd.exe cdrom open <CD drive letter:> and click Next. For instance, if your DVD is drive H, you will have to type C:WindowsNirCmd.exe cdrom open H: and click Next
- Give a name to the shortcut and click OK to close the shortcut wizard
- Whenever you feel like opening the DVD door, press Windows Key + D to minimize all windows and then double click on the shortcut you created on the desktop
You can also create a shortcut to close the DVD door. The method is same as above. Just use cdrom close in the command line highlighted in step 3. You can download NirCmd.exe from the NirSoft website.
Wizmo, FGS CD Open Close and EjectCD are some other basic tools that will create a Open or Close shortcuts on your desktop for your CD/DVD Tray.
See this post if your Optical drive tray will not open. It offers tips on how to open a stuck CD, DVD, Optical Drive Tray of your computer, including using a third-party tool called Tray Control.
Related Posts:
Have you ever needed to open your CD or DVD drive (generally referred to as your 'optical drive') but couldn't? Just your luck, your favorite movie, video game, or music was probably stuck inside.
Maybe the laptop's power died, maybe the drive in your desktop just quit responding, or maybe the door was just stuck or the disc came loose from a try just enough to jam things up.
Regardless of what's happening, or what you think might be happening, there's no reason to rush out and replace the disc or drive just because the eject button doesn't do what you expected it to do.
Fortunately, one of the following two methods almost always does the trick to get the drive open:
How to Force Eject a Disc From Within the OS
We'll start with the easiest way to get the drive open - skip the physical button on the outside and ask your operating system to force eject the disc. You can only try this if your computer has power and is working. Skip down to the next section if that's not the case.
Time Required: Forcing your CD, DVD, or BD drive to eject via your operating system's commands is very easy and should only take a few seconds to try.
Open File Explorer if you're using Windows 10 or Windows 8. Search for it or use the WIN+X menu to open it quickly.
Open Windows Explorer in earlier versions of Windows. You can do this by looking for that option when you right-click the Start button.
Once open, navigate to the optical drive from the menu on the left. This drive is often auto-named based on what disc is inside the drive but there's usually a small disc icon to help identify it.
If you have trouble finding it, look for This PC on the left in Windows 10 or 8, or Computer in earlier versions. Click the icon to the left to expand this if it's collapsed.
Right-click or tap-and-hold on the optical drive and choose Eject from the menu that pops up or down.
The drive bay or disc should spin down and eject within seconds.
Using a Mac? Similar to the method described above for Windows, find the disc icon, right-click on it, and then choose Eject. Here are some more ideas.
Eject Cd
If this doesn't work (Windows, macOS, Linux, etc.), it's time to get physical with it!
How to Open a CD/DVD/BD Drive.. With a Paper Clip
It sounds strange, yes, but most computer optical drives, including external ones and those you'll find in your game systems like Xbox and PlayStation, have a tiny pinhole that's designed as a last resort method to get the drive bay open.
Time & Tools Required: You'll need a single, heavy-duty paper clip - not industrial sized, but not one of those flimsy plastic ones, either. The whole process will take less than a few minutes and is very easy.
Unfold the paper clip until there is at least 1 to 2 inches (2 to 5 cm) that are as close to straight as you can get it.
Look closely at your disc drive. Directly under or above the drive bay door (the part that 'ejects' the disc), there should be a very small pinhole.
If you have one of those desktop optical drives where a large door flips down before the drive bay ejects, pull that down with your finger and then look for the pinhole.
Some older desktops require the opening of the front panel, sort of like a large 'door' to the computer's housing, to get to this pinhole.
Insert the paper clip into the pinhole. Inside the drive, directly behind the pinhole, is a small gear that, when rotated, will begin to manually open the drive.
Remove and reinsert the paper clip as often as needed to eject the drive bay enough to grab hold of it.
Slowly pull the drive bay until it's fully retracted. Take care not to pull too quickly or to continue to pull when you feel resistance.
Remove the CD, DVD, or BD disc from the drive. Slowly push the drive bay back into the drive until closed or press the open/close button if the drive is still working.
If these steps don't work, or you find yourself using the paper clip trick often, it may be time to look at some other options..
No Luck? Here's What to Do Next
At this point, there's likely something physically wrong with the drive or another part of the computer. Here are some things to consider doing:
- If your drive is external, unplug and plug back in both the data cable and the power cable.
- Check internally that the power and data cables are firmly connected.
- Restart your computer and try again.
- Replace the drive. Optical drives are relatively cheap — Amazon sells many for around $20 USD.
Those are not necessarily in a step-by-step troubleshooting order. What steps you take depends on a lot on the type of computer and optical drive you have, as well as your specific situation.